One-stop-gardens 98197 Bedienungsanleitung PDF herunterladen (Seite 6)

Page 6SKU 98197 For technical questions, please call 1-800-444-3353.

using Bolt (29) and Lock Nut (54)-see

Figure 5.

Secure the round hole end of the 11.

Height Adjustment Strap (6) to the

Angle Bracket (38). Place a Bushing

Spacer (30) over the end of the Slot

Head Bolt (71) and into the hole in

the Adjustment Strap (6)-see Figure 5

and Assembly Diagram. Secure with

Lock Washer (44) and Hex Nut (28).

Finish securing Height Adjustment 12.

Strap (6) to Height Adjustment Han-

dle. Place the slot on the Height Ad-

justment Strap in line with the square

hole. Secure in place with Carriage

Bolt (29), Washer (54) and Knob (5).

Hex Bolt (73)

Bag Mount

Arm (48)

Lock

Nut (60)

Figure 6

13. Attach both Bag Mount Arms (48) to

the outside of the housing with Hex

Bolts (73) and Lock Nut (60). Note

that the notches in the Bag Mount

Arms (48) must face upward and Bag

Mount Arms must be attached to the

outside of the housing-see Figure 6.

Hitch Pin

Hitch Bracket (47)

Cotter

Pin (75)

Spacers (77)

Figure 7

14. Insert two Spacers (77) between

Hitch Bracket (47) and Hitch Tongue

(65). Insert Hitch Pin (76) down

through the Hitch Bracket, Spacers

(77) and through Hitch Tongue (65).

Secure with Cotter Pin (75)-see Fig-

ure 7.

Hopper Bag Assembly

Starting at the center cut in the top of 1.

the Hopper Bag (12), insert the Left

Hand Upper Hopper Tube (9) through

the hopper bag stitched tubes. Re-

peat for the Right Hand Upper Hop-

per Tube (8).

Slide the two Upper Hopper Tubes 2.

(8/9) together. Make certain that the

center holes line up perfectly. Secure

in place with Curved Head Bolt (63)

and Hex Lock Nut (80) as shown in

assembly diagram.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Kommentare zu diesen Handbüchern

Keine Kommentare